要求報價
(英)自動工業分析儀Automatic Industrial Analyzer
- 型 號:
- 類 別:自動工業分析儀
- 產 地:鶴壁市
更新時間:2024-12-24
點擊次數:3043次
自動工業分析儀產品特點:適用于電力、煤炭、冶金、石化、煤化、環保、水泥、造紙、地質勘探、科研院所等行業對煤、礦石等物質的水分、灰分、揮發份進行測定并計算其固定碳含量和發熱量,還可以對飛灰、爐渣中的可燃物含量進行分析,符合國標GB/T212-2008《煤的工業分析方法》的要求。
自動工業分析儀產品特點:適用于電力、煤炭、冶金、石化、煤化、環保、水泥、造紙、地質勘探、科研院所等行業對煤、礦石等物質的水分、灰分、揮發份進行測定并計算其固定碳含量和發熱量,還可以對飛灰、爐渣中的可燃物含量進行分析,符合國標GB/T212-2008《煤的工業分析方法》的要求。
Product Characteristics: HTGF-6000 automatic industrial analyzer is applied to such industries as electric power, coal, metallurgy, petrochemical, coal chemical, environmental protection, cement, papermaking, geological exploration and scientific research institutions, etc. It conforms to requirements of GB/T212-2008 Proximate Analysis of Coal and can be used for measuring moisture, ash and volatile in such substances as coal and ore, calculating fixed carbon content and calorific value thereof and analyzing combustible matter content in the ash and slag.
HTGF-6000型自動工業分析儀的詳細資料:
Details of HTGF-6000 Automatic Industrial Analyzer:
HTGF-6000型自動工業分析儀功能特點:
Functional characteristics of HTGF-6000 Automatic Industrial Analyzer:
★ 流程規范、結果準確:模擬干燥箱、馬弗爐的試驗環境及條件,水分、灰分、揮發份的測試流程、條件和結果均滿足國標要求,不需要進行校正,可應用于仲裁分析。
★Standard process and accurate results: HTGF-6000 automatic industrial analyzer can simulate experiment environment and conditions of the drying oven and muffle furnace, comply with international standards without calibration in respect of testing procedures, conditions and results of the moisture, ash and volatile, and consequently can be applied to arbitration analysis.
★ 測試速度快:采用多爐體結構,帶有恒溫干燥裝置,水分、灰分、揮發份三個指標可任意組合測定或單獨測定,同時測試12個試樣的三項指標可以在150分鐘完成。
★Fast testing speed: A plurality of furnace structures as well as a constant temperature dryer are provided herein, so that the three indexes of moisture, ash and volatile can be tested in any combination or tested individually. Even the three indexes of 12 test samples can be finished within 150 min.
★ 自動化程度高:將高精度進口電子天平集成到儀器內部,結合自動稱量機構,實現在高溫下自動多次準確稱量。采用熱重分析法,自動稱樣、自動送樣、自動處理數據、結果計算、報表打印和存儲等,通過測定水分、灰分、揮發份可自動計算出固定碳含量、氫值和熱值。
★High degree of automation: High-precision imported electronic balance is integrated to the inside of the instrument and combined with an automatic weighing mechanism, realizing automatic accurate weighing repeatedly at high temperature. A thermogravimetry is adopted, achieving automatic weighing, automatic transferring, automatic data processing, result calculation, statement printing and storing, etc. The fixed carbon content, hydrogen value and calorific value can be calculated automatically by test the moisture, ash and volatile.
★ 操作簡單、安全:試驗過程中無需取放出坩堝蓋、送樣和取樣,避免高溫輻射和燙傷的危險。
★Easiness and safety in operation: There is no need to take out the crucible cover, feed or take the samples during the test, avoiding dangers of high temperature radiation and scalding.
★ 性價比高:采用單一測試度機完全按國標實現工業分析三項指標的精確測量,性價比高,功能齊全。
★High cost performance: Single test machine is used for measuring the three indexes of industrial analysis accurately based on national standard, obtaining high cost performance and perfect function.
★ 動態添加試樣:過程中可臨時添加試樣,適應用戶來樣不確定的特殊情況。
★Dynamic feeding of test sample: Test sample can be fed freely during test so as to satisfy uncertain exceptional circumstances of samples of the user.
HTGF-6000型自動工業分析儀技術參數:
Technical Parameters of HTGF-6000 Automatic Industrial Analyzer:
★ 試樣重量:(0.5-1.5)g
★Sample weight: (0.5-1.5)g
★ 最高工作溫度:1000℃
★Maximum operating temperature: 1000℃
★ 控溫精度:1℃
★Temperature control precision: 1℃
★ 試樣數量:水、灰、揮同時做1-12個,否則1-24個
★Sample quantity: 1-12 samples for moisture, ash and volatile respectively; otherwise, 1-24 samples
★ 測試溫度:105℃(水分)815℃(灰分)900℃(揮發份)
★Test temperature: 105℃ (moisture), 815℃ (ash) and 900℃ (volatile)
★ 測試時間:12個樣三項指標測試時間≤150分鐘
★Test time: Test time of the three indexes for 12 samples is less than or equal to 150 min in total.
★ 精密度:符合GB/T212-2008標準
★Precision: Conform to GB/T212-2008 standard
★ 準確度:在標準樣品的允許差范圍內
★Accuracy: Within allowable tolerance of the standard sample
★ 電源電壓:AC220V±10% 50HZ
★Power voltage: AC220V±10% 50HZ
★ 功率:≤4KW
★Power: ≤4KW
★ 外形尺寸:620×530×760mm
★Overall dimension: 620*530*760mm
★ 重量:65kg
★Weight: 65kg